Drum cleaner mini-PRA
Cleaner with aspiration is used to separate light dust particles, as well as for separating whole grain from broken grain and from other impurities. The product cleaning process depends on the sieve the separator is equipped with. By using this equipment, you can directly affect the quality of the final product.
Characteristics of this model:
- Support and body are made of pressed galvanized sheet;
- Manual screw for unloading impurities;
- Manual adjustment of the incoming product;
- Bolted connections;
- Replaceable sieves made of carbon steel;
- Manual adjustment of the drum angle.
Operating principle
The product flows by gravity into the hopper and is evenly distributed across the width, then the air stream passes through the product, which blows out light impurities. Then the product enters a rotating drum equipped with interchangeable sieves. The product passes through the drum, where it is separated from impurities. A good product falls through the sieves and large impurities spill out at the end of the drum. The size of the sieve openings is selected depending on the size of the product to be cleaned.
Technical characteristics
| Model | Mini-PRA |
| Preliminary cleaning capacity, kg/h | 1500 |
| Separation capacity, kg/h | 150 |
| Sieve area, m2 | 0,81 |
| Drum power, kW | 0,06 |
| Length, mm | 1240 |
| Width, mm | 510 |
| Height, mm | 855 |
| Weight without product, kg | 67 |
| Volume, m3 | 0,54 |
