Pellet press
Description
Pellet press is used to produce pellets of a given width using a disc and rolls with adjustable blades.
The process of pellets production is as follows:
- Feed is treated with heated steam.
- After that this product enters the pellet press.
- Then the product is evenly distributed between the rolls and disks of pellet press.
- Blades cut off granules of the required length.
To protect the pellet press from damage, a neodymium magnet is installed in the product intake area, where all metal parts are captured.
Additional information
- Product feed area and pellet press doors are made of 304 stainless steel.
- In case of emergency discharge, the pellet press is equipped with a pneumatic bypass line.
- Automatic lubrication system.
- Pellet press rolls are made of hardened steel.
- Pellet press discs are reliable and durable.
- Blades are made of wear-resistant steel.
Technical details
Model | Pellet press disc | Rolls | Motor, kW | Capacity, tph | Weight, kg | |||||
---|---|---|---|---|---|---|---|---|---|---|
Inner diameter | Pellet width | Pellet area | Rpm | Peripheral speed, m/s | Q-ty | Diameter | ||||
VPP 420 | 420 | 138 | 0,18 | 340 | 7,47 | 2 | 200 | 2х45 | 4-6 | 2980 |
VPP 520 | 520 | 178 | 0,29 | 238 | 6,48 | 2 | 240 | 2х90 | 9-12 | 6000 |
VPP 660 | 660 | 178 | 0,37 | 180 | 6,21 | 2 | 320 | 2х110 | 12-20 | 8000 |
228 | 0,47 | |||||||||
VPP800 | 800 | 265 | 0,67 | 165 | 6,91 | 2 | 360 | 2х132 | 22-25 | 10930 |